Lukas,
I have not modeled an ice rink, but it would be a big challenge! I commissioned one about 20 years ago, however, and still have some reference material, so I attached it here. Jeff’s comments echo completely true, considering that a Zamboni resurfacer melts the entire surface each time it is used.
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Jeff Haberl
Sent: Monday, March 04, 2013 10:05 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: RE: [EnergyPlus_Support] Simulating an ice hockey rink
Hello,
FYI, a paper on this was written in 1985 that used DOE-2 simulations that estimated the rink by adjusting the UA(deltaT) to match energy use data of the compresors collected on site. Problem with the building was that the ice rink was right above the women's locker room, which placed the cold radiative surface in a bad place. One of the largest "loads" was the Zamboni machine, which resurfaced the rink, and thereby had to be scheduled.
Haberl, J., Claridge, D. 1985. “Retrofit Energy Studies of a Recreation Center,” ASHRAE Transactions-Research, Vol. 91, Pt. 2, pp. 1421 - 1433 (June).
Additional material can be found another paper, that discusses how an empirical model and an expert system was used to predict on-going problems.
Haberl, J., Claridge, D. 1987. “An Expert System for Building Energy Consumption Analysis: Prototype Results,” ASHRAE Transactions-Research, Vol. 93, Pt. 1, pp. 979 - 998 (January).
Jeff
8=! 8=) :=) 8=) ;=) 8=) 8=( 8=) 8=() 8=) 8=| 8=) :=') 8=)8=?
Jeff S. Haberl, Ph.D.,P.E.,FASHRAE,FIBPSA,........jhaberl@xxxxxxxx
Professor............................................................Office Ph: 979-845-6507
Department of Architecture.............................Lab Ph:979-845-6065
Energy Systems Laboratory.............................FAX: 979-862-2457
Texas A&M University.....................................77843-3581
College Station, Texas, USA, 77843..................URL:www.esl.tamu.edu
8=/ 8=) :=) 8=) ;=) 8=) 8=() 8=) :=) 8=) 8=! 8=) 8=? 8=)8=0
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [EnergyPlus_Support@xxxxxxxxxxxxxxx] on behalf of rokkas80 [lukas.rokka@xxxxxxxxx]
Sent: Monday, March 04, 2013 8:51 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Simulating an ice hockey rink
Hi,
Does anyone here have experience from modeling an indoor ice hockey rink? I'm wondering how to model the Ice sheet in EnergyPlus?
Lukas Lundström
https://sites.google.com/site/weatherconverter/
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___