Hi
Do you mean "validate the software" or "validate-calibrate a model"?. These are two different things.
Regards
Luis
--- In
EnergyPlus_Support@xxxxxxxxxxxxxxx, "Ooi" <ooi_kb3@...> wrote:
>
> Hello,
>
> i measured the temperatures of the surfaces and indoor and outdoor air at a classroom which i also modelled for simulation. The effects of radiation, convection and conduction on the measuring probe were noted and compensated.
>
> The department of Meteorology gave me weather data at the nearby airport. Together with the local outdoor temperature, i could make a weather file with data at time and date of experiment.
>
> Hope this helps
> ooi
> --- In
EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@> wrote:
> >
> > have you looked at the testing and validation reports:?
> > Testing and validation page:
> > <
http://apps1.eere.energy.gov/buildings/energyplus/energyplus_testing.cfm>Testing
> > And Validation
> >
> > At 09:16 PM 3/11/2013, Harish Mummidivarapu wrote:
> >
> >
> > >Hi all,
> > >I'm working on Sustainable Buildings Project. I want some
> > >information regarding how can we validate the EnergyPlus software
> > >i.e how can we check whether the desired outputs matches(approx.)
> > >with the real case values. Please help me on this.
> > >
> > >Thank You.
> >
>