[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support]

Hi

If you only need the condensing loop then you'll have to build it from scratch.  Plant:MixedWaterLoop is the default for the Water to air heat pump template but it expects a boiler and tower to be specified......I'm new to E+ so that's my understanding!  If you avoid the water to air heatpump template then you should be able to specify a single condensing loop.

I've just simulated an aquifer thermal energy storage system and used the condenser loop to simulate the heat transfer that would be expected (25 deg c max in cooling mode, 9 deg C min in heating mode).  It needed a few setpoint work rounds to get the flow rates and temps out but the results I ended up with seemed reasonable.

hope that helped

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Bruno Scalet <bruno.scalet@...> wrote:
>
> Hello
> 
> I'm modeling a Water to Air heat pump system with a heat recovery system. I
> just found a problem. When I choose the Water to Air Heat Pump object, it
> doesn't have the option to choose the heat recovery system.
> 
> What does the Plant:MixedWaterLoop object means? Because I only need the
> condensing loop/line.
> 
> I don't know if I made myself clear, I hope you people could help me.
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/