[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Zone Temperature Peaks too Early

Could it be that the actual convection from surfaces is different or more or less than those modelled thereby transfering heat from surfaces to air faster or slower. Are there more internal surfaces like furniture which could contribute the these effects?

Jean

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "jeffreylauck" <JeffLauck@...> wrote:
>
> Hello All,
> 
> First off, thanks for a great community.  I've learned a lot from searching through the message archives over the past few months.
> 
> I have a model of a Passive House that I am trying to validate using measured data from the actual house.  I've created an hourly schedule file for the lights, electric equipment,  window usage, blind usage, and hot water consumption based on sub-hourly data collected at the site. I'm using a custom weather file from the roof-top weather station that monitors dry bulb temp, relative humidity, wind speed and direction, and global horizontal solar radiation.  The diffuse radiation component was estimated using the Erbs model prior to importing the data into the weather utility.  Currently I'm only looking at the summer of 2012.
> 
> The problem I'm having is that the peak temperatures in the model occur 2-4 hours before the measured data (2-3 hours in July and September, 3-4 hours in August).  Here's what I've determined so far:
> 
> 1. It's not due to a time shift in the data.  I've verified that all data is GMT-8 and that no Daylight Savings flags are included in the IDF.
> 2. It's not due to a lack of thermal mass.  I added a bunch of internal mass as a test and the peaks were reduced but occurred at the same time as previous models. Also, I'm using CondFD with 9 nodes and a 1-minute timestep.
> 3. I don't think it's due to my custom weather file, as I get a similar results using TMY data.
> 
> Does anyone have any suggestions on where to look next?  Any ideas would be greatly appreciated.
> 
> Thanks,
> 
> Jeff
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/