Stan Ho,
VRF is a zone-based system, while DOAS is an air loop-based system. This means that you can create a DOAS air loop which serves each zone and also have a VRF system serving each of the same zones.
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of kkkimostan
Sent: Sunday, August 04, 2013 11:13 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] VRF Dedicated Outdoor Air System with ERV
Hello,
I am simulating a building with VRF system for each thermal zone, and a VRF Dedicated Outdoor Air System with ERV. I cannot decide which is a good method to simulate this VRF Dedicated Outdoor Air System with ERV. It seems that the HVAC template DOAS cannot been assigned to VRF system. Is there any good methodology for this VRF DOAS ERV system? Thank
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___