[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Automatic operation venetian blinds energy consumption



Jean

Thanks. However, when you say small amount of energy what range are you talking of? Do you have some reference with data on this? I mean, stand by energy consumption is small but when added is significant. So I am trying to pin down this small amount of energy with little success. The nominal power of the motor is not so small. Multiplied by many windows may be significant.

Miguel

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "jeannieboef@..." <jeannieboef@...> wrote:
>
> It will be a small amount of energy. You'll have to define a other  
> equipment energy user with a design energy usage and figure out the  
> standby loss energy usage as a fraction of that. Then create a  
> fractional schedule to reflect this. Then write an EMS to monitor  
> blind operation and use to sensor values to overwrite your  
> otherequipment schedule using an actuator to suite.
> 
> As a beginner who has never used EMS, this may take 3 days. As an  
> expert, 15 minutes. It is a good excersize. Goodluck.
> 
> Mit freundlichen Grü�en
>   Sent from my iPhone (excuse the brevity)
> 
> i. A.
> Jean Marais
> b.i.g. bechtold
> Tel.   +49 30 6706662-23
> 
> On 26.08.2013, at 17:08, "migueltgpacheco" <migueltgpacheco@...>  
> wrote:
> 
> > Hi List,
> >
> > I want to estimate the energy consumption of automated blinds. I  
> > searched the group for this topic but I didn't find any reference to  
> > it. This is important because I couldn't find either any report on  
> > monitoring the energy consumption of blinds. I'm trying to model  
> > zero energy and everything must be accounted.
> >
> > Energyplus allows a number of sophisticated options for blind  
> > control.I am using BlockBeamSolar option for the ShadingControl  
> > object. But there is no way to know the energy consumption the  
> > automated operation of the blinds.
> >
> > I can´t use the nominal power of the blinds motor's for an estimate  
> > because this would be far too high. The blinds I'm modeling, can ope 
> > n or retract completely, besides varying the slat angle. Slat angle  
> > variation must consume less energy that open or retract the blinds e 
> > ntirely.
> >
> > Even if I know the energy consumption for changing angle slat, that  
> > would not be enough. The blinds are sometimes idle and sometimes on.  
> > I have doubts on which report I would use. There is no report that  
> > tells when a motor is on.
> >
> > Thank you in advance,
> > Miguel Pacheco
> >
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/