[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Was there a bug in v8 for rated pump power calc

Off hand, can't think of a CR for that having been issued.

You might check the last beta and see if it's been fixed in there.

You need to send input file to the helpdesk so that we can log a defect or whatever.

At 11:59 AM 9/5/2013, jeannieboef@xxxxxxxxx wrote:

Or 164 W, when using the rounded values in the table below.

On 05.09.2013, at 17:41, <jeannieboef@xxxxxxxxx> wrote:


Was there a bug in v8 for rated pump power calc?
I get 171 W.

Type Control Head [pa] Water Flow [m3/s] Electric Power [W] Power Per Water Flow Rate [W-s/m3] Motor Efficiency [W/W]
LOWTEMPHWSYS PUMP Pump:ConstantSpeed Intermittent 58411.20 0.0016 211.95 132307.70 0.57


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe