RE: [EnergyPlus_Support] ReadVarsESO.exe. Input file can't be found. [1 Attachment]

The problem has some progress but still some strange things going. Check everything 3 times. Attached *.rdd. What’s going on?

RVI:

ASP1308-C-SYS-CENTR.eso

ASP1308-C-SYS-CENTR_SHOPS.csv

Site Outdoor Air Drybulb Temperature

SHOPS,Zone Mean Air Temperature

SHOPS,Zone Thermostat Air Temperature

SHOPS,Zone Thermostat Heating Setpoint Temperature

SHOPS,Zone Thermostat Cooling Setpoint Temperature

SHOPS,Zone Cooling Setpoint Not Met Time

SHOPS,Zone Heating Setpoint Not Met Time

Baseboard Total Heating Rate

SHOPS Heating Coil,Heating Coil Heating Rate

SHOPS DOAS Heating Coil,Heating Coil Heating Rate

SHOPS Cooling Coil,Cooling Coil Total Cooling Rate

SHOPS DOAS Cooling Coil,Cooling Coil Total Cooling Rate

SHOPS DOAS,Air System Outdoor Air Flow Fraction

SHOPS DOAS,Air System Outdoor Air Minimum Flow Fraction

SHOPS DOAS,Air System Outdoor Air Mass Flow Rate

SHOPS DOAS,Air System Mixed Air Mass Flow Rate

SHOPS DOAS Heat Recovery,Heat Exchanger Total Heating Rate

SHOPS DOAS Heat Recovery,Heat Exchanger Total Cooling Rate

SHOPS Supply Fan Inlet,System Node Temperature

SHOPS Cooling Coil Outlet,System Node Temperature

SHOPS Supply Inlet,System Node Temperature

SHOPS DOAS Mixed Air Outlet,System Node Temperature

SHOPS DOAS Cooling Coil Outlet,System Node Temperature

SHOPS DOAS Heating Coil Outlet,System Node Temperature

readvars.audit:

ReadVarsESO

processing:ASP1308-C-SYS-CENTR.rvi

input file:ASP1308-C-SYS-CENTR.eso

output file:ASP1308-C-SYS-CENTR_SHOPS.csv

number variables requested for output= 15

found/finding:

1 Site Outdoor Air Drybulb Temperature

1 SHOPS:Zone Mean Air Temperature

0 SHOPS:Zone Thermostat Air Temperature

1 SHOPS:Zone Thermostat Heating Setpoint Temperature

1 SHOPS:Zone Thermostat Cooling Setpoint Temperature

1 SHOPS:Zone Cooling Setpoint Not Met Time

0 SHOPS:Zone Heating Setpoint Not Met Time

2 Baseboard Total Heating Rate

1 SHOPS Heating Coil:Heating Coil Heating Rate

1 SHOPS DOAS Heating Coil:Heating Coil Heating Rate

1 SHOPS Cooling Coil:Cooling Coil Total Cooling Rate

1 SHOPS DOAS Cooling Coil:Cooling Coil Total Cooling Rate

1 SHOPS DOAS:Air System Outdoor Air Flow Fraction

1 SHOPS DOAS:Air System Outdoor Air Minimum Flow Fraction

1 SHOPS DOAS:Air System Outdoor Air Mass Flow Rate

1 SHOPS DOAS:Air System Mixed Air Mass Flow Rate

0 SHOPS DOAS Heat Recovery:Heat Exchanger Total Heating Rate

0 SHOPS DOAS Heat Recovery:Heat Exchanger Total Cooling Rate

0 System Node Temperature

0 SHOPS Cooling Coil Outlet:System Node Temperature

0 SHOPS Supply Inlet:System Node Temperature

0 SHOPS DOAS Mixed Air Outlet:System Node Temperature

0 SHOPS DOAS Cooling Coil Outlet:System Node Temperature

0 SHOPS DOAS Heating Coil Outlet:System Node Temperature

ReadVars Run Time=00hr 00min 0.09sec

ReadVarsESO program completed successfully.

BR,

Artem Zhukov

HVAC Consultant/Building Simulation Engineer

logo

Mob.: +420 774 081 898

SKYPE: zhukov_artem

View profile

Web Cal

BE RESPONSIBLE. THINK ABOUT THE ENVIRONMENT BEFORE PRINTING THIS E-MAIL OR ITS ATTACHMENTS

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Edwin Lee
Sent: Monday, September 16, 2013 15:46
To: EnergyPlus_Support@xxxxxxxxxxxxxxx; EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] ReadVarsESO.exe. Input file can't be found.

Oh, or "variable name"

Input File eplusout.eso

Output File eplusout.csv

Site Outdoor Drybulb Temperature

Zone Air Temperature

Zone Air Humidity Ratio

Zone Air System Sensible Cooling Rate

Zone Air System Sensible Heating Rate

Zone Total Internal Latent Gain Rate

On Mon, Sep 16, 2013 at 7:29 AM, Edwin Lee <leeed2001@xxxxxxxxx> wrote:

Don't put input file or output file in the eso.

eplusout.eso
eplusout.csv
Variable Name Site Outdoor Drybulb Temperature
Variable Name Zone Air Temperature
Variable Name Zone Air Humidity Ratio
Variable Name Zone Air System Sensible Cooling Rate
Variable Name Zone Air System Sensible Heating Rate
Variable Name Zone Total Internal Latent Gain Rate

On Mon, Sep 16, 2013 at 1:06 AM, Artem Zhukov <artem.zhukov@xxxxxxxxxxx> wrote:
Here is my input:
Input File eplusout.eso
Output File eplusout.csv
Variable Name Site Outdoor Drybulb Temperature
Variable Name Zone Air Temperature
Variable Name Zone Air Humidity Ratio
Variable Name Zone Air System Sensible Cooling Rate
Variable Name Zone Air System Sensible Heating Rate
Variable Name Zone Total Internal Latent Gain Rate
BR,
Artem Zhukov
HVAC Consultant/Building Simulation Engineer
Mob.: +420 774 081 898
SKYPE: zhukov_artem
View profile
Web Cal
BE RESPONSIBLE. THINK ABOUT THE ENVIRONMENT BEFORE PRINTING THIS E-MAIL OR ITS ATTACHMENTS
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Edwin Lee
Sent: Thursday, September 12, 2013 22:02
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] ReadVarsESO.exe. Input file can't be found.
What are the contents of your my.rvi file?
On Thu, Sep 12, 2013 at 1:56 PM, Artem Zhukov <artem.zhukov@xxxxxxxxxxx> wrote:
Good day I want to use ReadVarsESO.exe program to generate csv. But met the problem that the program wont recognize the input file, nevertheless the file eplusout.eso exist in the same folder.
BR,
Artem Zhukov
HVAC Consultant/Building Simulation Engineer
Mob.: +420 774 081 898
SKYPE: zhukov_artem
View profile
Web Cal
BE RESPONSIBLE. THINK ABOUT THE ENVIRONMENT BEFORE PRINTING THIS E-MAIL OR ITS ATTACHMENTS

--
Edwin Lee, PhD
Engineer,Commercial Buildings Research Staff
National Renewable Energy Laboratory

--
Edwin Lee, PhD
Engineer,Commercial Buildings Research Staff
National Renewable Energy Laboratory

Edwin Lee, PhD

Engineer,Commercial Buildings Research Staff

National Renewable Energy Laboratory