Someone may correct me but I believe they are the same as the ASHRAE Fundamentals design load calculations.
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
On Behalf Of cjcfromslc@xxxxxxxxx
Sent: Wednesday, September 18, 2013 1:45 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Load Calculations
For compliance with ASHRAE 90.1-2010, heating and cooling system design loads must use the procedures in ANSI/ASHRAE/ACCA Standards 183-2007.
Can you setup EnergyPlus to following Standard 183 procedures?
CURTIS JAMES CLARK PE, LEED AP BD+C
SUSTAINABILITY SERVICES
375 WEST 200 SOUTH, SUITE 100
SALT LAKE CITY, UT 84101
T: 801.521.8600
F: 801.521.7913
www.gsbsarchitects.com
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___