[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Using AFN for windows, but with default infiltration



If you want to model an infiltration value use the zone infiltration. The AFN its to predict the infiltrattion value when you don"t know it.


On 3 October 2013 17:42, Joe Huang <YJHuang@xxxxxxxxxxxxxxxxxxxxxxxx> wrote:
 

I don't think the infiltration objects can be used in conjunction with the AFN. That would violate the mass balance of the AFN, wouldn't it?

Sent from my IPad

Joe Huang


On Oct 3, 2013, at 8:35 AM, Oscar Hernandez <eng.ohw@xxxxxxxxx> wrote:

 

Hi,

Use the zone infiltration.

Oscar

On Oct 3, 2013 2:48 PM, "allinson_louis" <allinson_louis@xxxxxxxxxxx> wrote:
 

Hi All

I am using AFN to model air flow through window openings that I am controlling using EMS

However, when the windows are closed the only infiltration is through cracks and the infiltration is much less than 0.1ach. I want to model a 'default' 0.1ach when the windows are closed, as this is a typical value used in simulations.

Is this possible?




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___