Re: [EnergyPlus_Support] difference between weather file and simulation output (dry bulb temperature)

[Don Shirey <dshireyiii@xxxxxxxxx>]

Look in the Input Output Reference and search for "Weather Data Hourly Interpolation "... this might explain the differences that you are seeing.

On Monday, October 28, 2013 5:08 PM, "alexmac_00@xxxxxxxx" <alexmac_00@xxxxxxxx> wrote:

 

Dear All,

just for curiosity I was comparing the outdoor dry bulb temperature of the weather file .epw with the simulation output variable "outdoor dry bulb". Is it normal that the values are not equal? They are very similar, but not equal. I was wondering if EnergyPlus does some adjustments to the dry bulb temperature values that it finds in the .epw before applying those to the simulations. 

Thanks,

Alessandro

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___