[EnergyPlus_Support] RE: water temperature in HW plant loop too far hot

[<fpasserini.tn@xxxxxxxxx>]

Is the HW loop operating even in the summer season? You should avoid it.

If you are using Pipe:Adiabatic the problem will maybe be solved if you use an object that considers the heat losses through the pipes.

---In EnergyPlus_Support@xxxxxxxxxxxxxxx, <alexmac_00@...> wrote:

Dear users,

I am getting an error saying that the water temperature in the HW plant loop is getting too far hot. I have read few other conversations on this topic, but I hope that you have some more tips.

I believe that there is something wrong with the pump (constant speed) because I can easily solve this issue by replacing the constant speed pump with a variable speed pump. But theoretically it should also work with a constant speed pump with a on/off operation...any clue? 

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___