[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Custom Phase Change System



Chin, 
I think this can be modeled with the Ice storage detailed model in E+ using the freezing temperature, charge and discharge curves and timestep of curve--  There is also the new DX thermal storage that might be usable..  Not sure if you have already looked into this, but please let me know if you think this would work?  



Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions
120 E. Pritchard St.  | Asheboro, NC 27203 
 | Mobile 503-688-8951
  





On Thu, Jan 9, 2014 at 4:31 PM, <chien.harriman@xxxxxxxxx> wrote:
 

Hi There-


I have a technology I found through a colleague in the UK, where the central plant (chiller in this case, only) stores energy in a series of tubes of phase change material/

The chiller piping runs through the middle of these tubes which are packed with phase change material.  He has rafts of data that would allow very accurate modeling of the system, including how the phase change capacity changes as a function of temperatures, the calculated convection coefficient, and the convective losses as a function of temperature and flow rate.  As much data as any engineer would want...as it was someone's PhD thesis.

I'm asking the group first how difficult it would be to make this happen.  I suppose there is not an out-of-the-box solution, but if there is, does anyone know of one?

So if this is custom programming (I have programming experience and am pretty active with the OpenStudio team so I could maybe get them to help me a little bit :) where would I start to build a module or plugin to talk to EnergyPlus?  And finally, do you think this will be something that is very hard for a first-timer, given the technology I've described?

Thanks so much,
Chien Si




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___