[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Σχετ: [EnergyPlus_Support] air to water h eat pump [1 Attachment]



Camilla,

I don't quite understand what you mean by radiant panels (to which exactly E+ object are you referring?)

I don't know if it is of help but I attach a complete node map of an air to water heat pump feeding baseboard heaters


Simos




ΣÏ?ιÏ? 2:24 μ.μ. ΤεÏ?άÏ?Ï?η, 15 Î?ανοÏ?αÏ?ίοÏ? 2014, ο/η Camilla Quercia <camilla.quercia@xxxxxxxxx> έγÏ?αÏ?ε:
 
Dear Santiago and all users

I've try to use the AIR TO WATER heat pump with RADIANT PANELS and it's running! The problem is that i don't understand how i have to manage air nodes (like air inlet and outlet of the Coil:Heating and Cooling) has anyone ever used radiant panels with an air to water heat pump and help me to understand?


Thank you very much
Camilla Quercia

2014/1/14 Camilla Quercia <camilla.quercia@xxxxxxxxx>
Dear Santiago
looking the .svg of the example file i was arrived at the same conclusion and in effect I've tried to model the system using a water heater heat pump and a chiller  (with fancoil) and..it's running.Thank you for your help!

I hope that is similar do that also with radiant panels...i will try..but I'm not sure!

Best regards
Camilla Quercia










2014/1/9 Santiago Velez <santiagogvelez@xxxxxxxxx>
 
Dear Camila, 
I ran into the same situation a couple of times, an 'air to water heatpump for cooling and heating'. My approach was to model a separate water loop for heating and cooling. On the heating loop I used the heatpump arrangement that you described (the one on HeatPumpWaterHeater.idf in the example files) and on the cooling loop just and air cooled chiller. I'am not aware you are able to do all of that with just with one heatpump object. Just make sure you are not heating and cooling at the same time different parts of the building.... unless your system is able to do that.
Happy to help with what I can.
Best regards,
Santiago.


2014/1/9 <camilla.quercia@xxxxxxxxx>

 
Dear users

I once again need your experience
I have to create an electric heat pump AIR TO WATER for heating and cooling.

I've tried using "Water heater heat pump" and its idf. sample file but I'm not able to use the same pump for cooling and heating.

in effect when i tried to simulate this error accurred

** Warning ** Node used as an inlet more than once: RESID_HPWHWATERINLETNODE
   **   ~~~   **   Used by     : BRANCH, name=HPWH RESID RISC HW BRANCH
   **   ~~~   **   as inlet for: WATERHEATER:HEATPUMP, name=RESIDHEATPUMPWATERHEATER
   **   ~~~   **   and  by     : BRANCH, name=HPWH RESID RAFFR HW BRANCH
   **   ~~~   **   as inlet for: WATERHEATER:HEATPUMP, name=RESIDHEATPUMPWATERHEATER

how should I do?
it's possibile in E+ have only one heat pump (air to water) both for heating and cooling?
or i have to create two theoretical heat pumps?
i have to use that with fancoil in one situation and with radiant panel in an other one.

Thanks in advance
Camilla Quercia




--
Camilla Quercia




--
Camilla Quercia





__._,_.___
View attachments on the web

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\ASHP BB.png