[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Fw: Bug O.S. V.1.3.0.; Under Tab: constructions, subtab: Constructions, Layers: materials representation (display error).


Hello Antonio,
As Linda suggested earlier, you're probably looking for this:

<mailto:openstudio-support@xxxxxxxxxxxxxxxxxxxxx>openstudio-support@xxxxxxxxxxxxxxxxxxxxx
<https://lists.sourceforge.net/lists/listinfo/openstudio-support>https://lists.sourceforge.net/lists/listinfo/openstudio-support

Have you tried it already?

Miroslav


On 14.04.2014 20:29, Antonio Pais wrote:
>  
Thank you Linda! 
I have already look into the other group, and after register and enter i notice that is about the legacy version.
> About this forum you mention now, and mention before, <https://openstudio.nrel.gov/forum>https://openstudio.nrel.gov/forum, is a forum were we not able to interact this way. Is not "closed" but is under post moderation. That's it.
> I'm really in search for a forums were we can exchange information about this two softwares, Eplus, and O.Studio. 
> I'm interested in take advantage of the variables and object capabilities to be able to make some improvements to it. 
An example: I'm interested to modulate the influence of the water vapor in a room, of an indoor pool.
I know about the overall implications of the model. But being realistic, and by all studies being made the major parameter involved is the evaporation rate. Off course other can be included, but they are negligible, like the conduction to the ground (less than 1% acording some studies..) So an way to connect the feed back from the air room temperature to the evaporation, water model, back and foward, it would be great...
Ok, long story short. I'm interested in learning about the manipulation of the objects, in OS and Eplus... and because of that a Ostudio forum, it would be great...
 On Monday, April 14, 2014 6:07 PM, Linda Lawrie <mailto:linda@xxxxxxxxxxxxxx><linda@xxxxxxxxxxxxxx> wrote:
>  
Well retracting that.  -- that address is for the legacy plugin
> 
> <https://openstudio.nrel.gov/forum>> https://openstudio.nrel.gov/forum
> 
> still works and had activity last week -- is that what you were saying is closed?
> 
> At 10:02 AM 4/14/2014, Linda Lawrie wrote:
> 
> 
>> I did not mean you shouldn't post here -- just that there might be a better place for posting OS problems.
>> 
>> Looks like it should be:
>> openstudio-support mailing list
>> <mailto:openstudio-support@xxxxxxxxxxxxxxxxxxxxx>>> openstudio-support@xxxxxxxxxxxxxxxxxxxxx
>> <https://lists.sourceforge.net/lists/listinfo/openstudio-support>>> https://lists.sourceforge.net/lists/listinfo/openstudio-support
>> 
>> Which is not, as far as I know, closed.  I saw messages there last week.
>> 
>> At 09:52 AM 4/14/2014, Antonio Pais wrote:
>> 
>> 
>>> Thank you Josep.
>>> Yes it is. And i 've got the same solution, that's one way.
>>> 
>>> The underling problem/ question/verification is to assure that is not an installation bug or problem and, in principle, the simulation, running on the Eplus, shouldn't have any unusual or erroneous results due to installation processes.
>>> Thank You.
>>> 
>>> Linda, i realize that. and i did it..., however OS forum is closed, and there we cannot read from each-other...
>>> I realize also that  many of us that use Eplus also use OS... and so i get an quick feedback.
>>> Sorry for that Linda.
>>> 
>>> PS: if anyone knows a group, similar to this one, with direct communications, were we can discuss OpenStudio subjects, i ill be very glad to know.
>>> 
>>> Thanks all!
> On Monday, April 14, 2014 4:14 PM, Linda Lawrie <mailto:linda@xxxxxxxxxxxxxx><linda@xxxxxxxxxxxxxx> wrote:
>  
> Suggest that you contact the OS group.  This group is mainly for EnergyPlus questions.
> 
> For support with the new OpenStudio tools, please either email <mailto:openstudio@xxxxxxxx>openstudio@xxxxxxxx or visit the support forum at <https://openstudio.nrel.gov/forum> https://openstudio.nrel.gov/forum.
> 
> 
> 
> 
> 
> 
> 




__._,_.___

Primary EnergyPlus support is found at:
<http://energyplus.helpserve.com>http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
<http://www.energyplus.gov>http://www.energyplus.gov

The group web site is:
<http://groups.yahoo.com/group/EnergyPlus_Support/>http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.� Limit attachments to small files.

EnergyPlus Documentation is searchable.� Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.


<http://geo.yahoo.com/serv?s=97476590/grpId=3387488/grpspId=1705007389/msgId=31732/stime=1397541019>

<https://groups.yahoo.com/neo/groups/EnergyPlus_Support/info;_ylc=X3oDMTJlMDN1aG9mBF9TAzk3MzU5NzE0BGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTM5NzU0MTAxOQ-->Visit Your Group
* <https://groups.yahoo.com/neo/groups/EnergyPlus_Support/members/all;_ylc=X3oDMTJmZjIxNjYyBF9TAzk3MzU5NzE0BGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwN2dGwEc2xrA3ZtYnJzBHN0aW1lAzEzOTc1NDEwMTk->New Members 9
<https://groups.yahoo.com/neo;_ylc=X3oDMTJkb29iNnBrBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxMzk3NTQxMDE5><http://l.yimg.com/ru/static/images/yg/img/email/new_logo/logo-groups-137x15.png>
� <https://info.yahoo.com/privacy/us/yahoo/groups/details.html>Privacy � <mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>Unsubscribe � <https://info.yahoo.com/legal/us/yahoo/utos/terms/>Terms of Use
__,_._,___