Dear all,
I established a simple building (4 rooms) model in DesignBuilder, each room with a FCU (fan coil unit), and a chiller, a boiler and a cooling tower. The simulation results in DesignBuilder
are fine, in summer design day, the indoor temperature is reduced to comfort ranges. But when I exported to EnergyPlus, the HVAC system does not work, the chilled water flow rate is 0.
Is there anything else I need to do when I export the model to EnergyPlus.
Thanks very much, I have been stuck here for a long time.
Best
Bing Yan
Research assistant
Electrical & Computer Engineering
University of Connecticut
371 Fairfield Way, Unit 4157
Storrs, CT 06269-2157
__._,_.___
Posted by: "Yan, Bing" <biy10001@xxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___