James V Dirkes II
On Aug 18, 2014, at 7:14 AM, "hisham.rashrash@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Dear group,
Is my interpretation correct? because the following error message appeared after I added daylighting controls to zones in a typical floor to which I applied a zone multiplier value.
** Severe ** DayltgAveInteriorReflectance: Multiplier > 1.0 for window 1A2A3F:F17OFFICEOPENPLAN_WALL_7_0_0_1_0_1_WIN in Zone=1A2A3F:F17OFFICEOPENPLAN
** ~~~ ** ...not allowed since it is in a zone with daylighting.
** Fatal ** Progrem terminates due to preceding conditions.
...Summary of Errors that led to program termination:
..... Reference severe error count=1
..... Last severe error=DayltgAveInteriorReflectance: Multiplier > 1.0 for window 1A2A3F:F17OFFICEOPENPLAN_WALL_7_0_0_1_0_1_WIN in Zone=1A2A3F:F17OFFICEOPENPLAN
************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).
If E+ cannot model daylighting controls for zones with multipliers, then it will be really difficult to deal with high rise buildings for which there is a high number of typical floors with daylighting controls!
Please advise.
Hisham
.
__._,_.___
Posted by: Jim Dirkes <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___