The algorithm still works, but you need to understand that no interzonal "clipping" is happening regarding interior reflections and for radiation exchange, all the surfaces can "see" each other. There is a certain amount of error depending on your geometry and window positions. But ask yourself if the error is more when using "FullExterior" only.
Mit freundlichen Grü�en- Sent from my iPhone (excuse the brevity)
i. A.
Jean Marais
b.i.g. bechtold
Tel. +49 30 6706662-23
On 12.09.2014, at 14:06, "ecoeficiente@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
I have a small model with on-purpose non-convex zones and FullInteriorExterior solar distribution which completes successfully the simulation. I thought this was not possible. Has there been any changes in recent Energyplus versions on this regard and not documented?
Regards,
Germán Campos
<nonconvex.dxf>
<nonconvex.idf>
__._,_.___
Posted by: "jeannieboef@xxxxxxxxx" <jeannieboef@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___