Hello,
Please advice what’s the problem with the idf attached.
Once it is opened by idf editor during the Validity Check command (Ctrl+R) the program shows error “Invalid coice”. But it is not true if you will check for instance this module:
SimulationControl ,б═б═
б═б═Yes , !- Do Zone Sizing Calculation
б═ Yes , !- Do System Sizing Calculation
б═ Yes , !- Do Plant Sizing Calculation
б═ Yes , !- Run Simulation for Sizing Periods
б═ YES ; !- Run Simulation for Weather File Run Periods
What’s the problem?
ARTEM ZHUKOV | HVAC/Mechanical Engineer | HVAC TPM | Energy Engineer | Building Physics Specialist | Sustainability Engineer | M: +420 774 081 898 | View LinkedIn profile | Web Cal
__._,_.___ View attachments on the web
Posted by: "Artem Zhukov" <green.azhukov@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___