[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] New to modelling - Zones not meeting set point [1 Attachment]





Hi guys,

I'm new to EnergyPlus and am currently working on my first energy model.  There's a single floor of the building that i'm modelling, and looking at the outputs for a week in summer and winter it seems that conditioned zones are not meeting the temperature setpoint.  

I'm had a look at a few things but am struggling to figure it out, it would be great is anyone could tell me where I've gone wrong!  I've attached the .idf.    

Many thanks,

John




__._,_.___
View attachments on the web

Posted by: jdeds91@xxxxxxxxxxxx


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___
Attachment not found:
D:\Eudora\Attach\Single_Floor.idf