[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] ep-help
I think newer versions of the software explain the message a
bit better.
This says the fluid properties for Glycol Specific heat have reached
outside the range of the inputs for those same properties.
I believe if you look at some of the example PV files -- you will see the
same messages.
At 09:37 AM 12/26/2014, Zahra Balador zbalador@xxxxxxxxx
[EnergyPlus_Support] wrote:
I have analyzed the performance
of photovoltaics in this file but there is this warning which I do not
understand:
I do not know to which part this warning is related...
Warning ** GetSpecificHeatGlycol: Temperature out of range (too low) for
fluid specific heat
************* ** ~~~
** This error occurred 62435 total times;
************* ** ~~~
** during Warmup 0 times;
************* ** ~~~
** during Sizing 0 times.
************* ** ~~~
** Max=-1.500121E-003 {C} Min=-5.054333 {C}
*************
************* ** Warning ** GetSpecificHeatGlycol:
Temperature out of range (too high) for fluid specific heat
************* ** ~~~
** This error occurred 394058 total times;
************* ** ~~~
** during Warmup 0 times;
************* ** ~~~
** during Sizing 0 times.
************* ** ~~~
** Max=219.982747 {C} Min=125.000341 {C}
*************
__._,_.___
Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___