Hi.
I'll change the transmittance of the solar shading device by a moon. So I wrote a schedule of idf as follows.
Schedule:Compact,
Eaves, !- Name
Fraction, !- Schedule Type Limits Name
Through:05/31, !- Field 1
For:AllDays, !- Field 2
Until:24:00, !- Field 3
1, !- Field 4
Through:11/30, !- Field 5
For:AllDays, !- Field 6
Until:24:00, !- Field 7
0, !- Field 8
Through:12/31, !- Field 9
For:AllDays, !- Field 10
Until:24:00, !- Field 11
1; !- Field 12
And 3 kinds of calculation, natural room air temperature was compared between the conduct.
(1) case fig.1 for which solar shading isn't used
(2) the occasion with the solar shading fig.2
(3) case fig.3 which changed the transmission factor of the solar shading equipment to 0.0 from 1.0 by a moon
Natural room air temperature is different from (2) in July and August by (3). I don't understand a reason. Advice, please.
Regards,
Koji Takemasa (Ph.D.)
--
Name : Koji Takemasa (Ph.D.)
Mail : koji_takemasa@xxxxxxxxx
--------------- LEAD Labo. ---
__._,_.___ View attachments on the web
Posted by: Koji Takemasa <koji_takemasa@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___