Using E+ edit, look at the Output:Variable object. The last input is Schedule Name. Clicking here allows you to choose one of the scheduled in your IDF file.
You will have to make your own schedule for the hours you want. One way to do this is to start with a day schedule and select the hour you want. Then make a week schedule using the referencing the day schedule for each day of the week. Finally make a year
schedule referencing the week schedule for the entire year. Then for your output variable, choose the year schedule. Check the input output reference document for details on making schedules.
Ned Lyon, P.E. (MA, WV)
Staff Consultant
SIMPSON GUMPERTZ & HEGER
781.907.9000 main
781.907.9350 direct
617.285.2162 mobile
781.907.9009 fax
www.sgh.com
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
Sent: Thursday, February 05, 2015 3:06 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: RE: [EnergyPlus_Support] time schedule simulation
thank you very much.how could i use a schedule to output only the data i want for that one hour?whats the name of this field?
__._,_.___
Posted by: "Edward G. Lyon" <EGLyon@xxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___