[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] High thermal inertia





Do you have an adiabatic floor or one with ground contact?  If the latter, check the ground temperatures you are using.

At 09:55 AM 4/15/2015, frantzheribert@xxxxxxxx [EnergyPlus_Support] wrote:
I'm trying to build a single zone with very thick walls (high thermal inertia) with no internal loads, no HVAC and little infiltration. The zone air temperature should be around the average outdoor temperature. In the results viewer of Open Studio, inertia is effective because there is little variation of the zone air temperature but the zone mean air temperature is above the average outdoor temperature (+3 or 4°C); I don't understand why. Could somebody help me ?


__._,_.___

Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___