Hi,
I don't think it differs from any other materials. You just need to find the physical property of each material (thermal conductivity, mass, etc) and input that in E+. Then create constructions based on those materials.
I'm quite sure there is literature on the subject. The only thing is that literature might define ranges, or there might be differences between sources, as the actual properties of these materials depends on the know-how or "recipe" of the person creating it. It won't be as definitive as looking at a spec sheet for a particular brand of fiberglass batts.
It's the same for concrete by the way... Even ashrae tells you that light concrete is between x and y, not some absolute value.
Good luck
Best,
Julien
Envoyé de mon iPhone
Envoyé de mon iPhone
Le 18 mai 2015 à 18:16, "ana5patil@xxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> a écrit :
I am trying to know the thermal transfer through roof and wall elements and relate it to thermal comfort for the building blocks which are constructed using traditional building materials.
My questions are,
How to create building elements using traditional building materials. For example, Rat-trap bond wall, mud block wall, conical clay tiles used for roof with cement mortar covering with china clay tiles.
__._,_.___
Posted by: Julien Marrec <julien.marrec@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___