[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Zero values on surface window front / back face temperature layer 1





Though the documentation doesn't say that, this output variable is only available for the Complex Fenestration objects.

I do not know if the documentation has been corrected or not for later versions.

At 08:07 AM 6/9/2015, austeven2005@xxxxxxxxxxx [EnergyPlus_Support] wrote:


Output variables of "surface window front face temperature layer 1" and "surface window back face temperature layer 1" are being set for an EnergyPlus example file. The output for these two variables are all zero. However, other variable such as "surface inside/outside face temperature" is available. The file and data used is listed below.

Version of EnergyPlus : 8.1
Example file : RefBldgLargeOfficeNew2004Chicago
Weather data : USA
ILChicago-OHare.Intl.AP.725300TMY3

The files are available on folder of EnergyPlus but I also uploaded to below link for your convenience. https://www.dropbox.com/sh/jnskw49fho...

Your effort is much appreciated for solving the problem. Thank you.






__._,_.___

Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___