[EnergyPlus_Support] Heat & Moisture Transfer (HAMT) model: Sensible Heating Rate [3 Attachments]

["juniacompostella@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Dear All,

I am using the Heat & Moisture Transfer (HAMT) model as HeatBalanceAlgorithm.

I compared the Air System Sensible Heating Rate results using the same weather file with different outside air relative humidity. The first EPW has 50% relative humidity (whole year). The second EPW has 90% relative humidity (whole year). 

I get a higher result Air System Sensible Heating Rate for the 50% RH case and lower for the 90% case. It should be the opposite considering that the conductivity when wet gets higher. 

Attached the IDF and EPW.

Can anyone help?

Thank you,

Best Regards,

Junia

__._,_.___

  	View attachments on the web

---

Posted by: juniacompostella@xxxxxxxxx

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 7

• Privacy • Unsubscribe • Terms of Use

__,_._,___

Attachment not found:
D:\Eudora\Attach\ITA_Milano-Linate.160800_IGDGEPW50rhCSV1.epw

Attachment not found:
D:\Eudora\Attach\TestWall081.idf

Attachment not found:
D:\Eudora\Attach\ITA_Milano-Linate.160800_IGDGEPW90rhCSV.epw