[EnergyPlus_Support] Placing exchanger in air loop

["a.aelhefni@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Hi all ,

I need to place a heat exchanger (plate or wheel) after the cooling coil for a reheat .

I've placed a heat recovery exchanger having the air side inlet and outlet on the air loop main branch and the exhaust is placed on the relief of the mixing box .

I get the following error :

** ..Invalid Air Loop Component Type = "HEATEXCHANGER:AIRTOAIR:SENSIBLEANDLATENT".

is there a way I can place the exchanger after the coil ?

__._,_.___

---

Posted by: a.aelhefni@xxxxxxxxx

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 6

• Privacy • Unsubscribe • Terms of Use

__,_._,___