Re: [EnergyPlus_Support] G3.1.3.11

["Jean Marais jeannieboef@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

This is a bit difficalt to explain quickly.

I recommend the following steps

1) downloading and installing a trail version of designbuilder
2) importing a relevant ASHRAE detailed HVAC system
3) exporting the IDF as a text file
4) comparing the setpoint managers on the different nodes in the idf to the setpoint manager settings on the graphical systems diagram in DesignBuilder.

This will help you understand the connections, settings, etc.

Hope this helps.

On 5 Nov 2015 3:25 am, "dingwenting@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

 

Hi,

 

Who can tell me how to set the cooling tower temperature as required in ASHRAE Standard 90.1-2007, which need the cooling tower to be contralled to maintain a 70°F leaving temperature where weather permits, floating up to leaving water temperature at design conditiongs.

 

Thank you.

 

Wenting

__._,_.___

---

Posted by: Jean Marais <jeannieboef@xxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 9

• Privacy • Unsubscribe • Terms of Use

__,_._,___