[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] EnergyPlus 8.3 and Rhino:Grasshopper:ladybug





Hi Artem,
1. You can create or import your IDF file to Honeybee and then adjust your parameters.
2. The "Idf updator" can change your idf version. You can just open older idf file by newer version, not viseversa.
Hope this is helpful.




On Thursday, May 14, 2015 4:06 PM, "'Artem Zhukov' az141208@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:


 
Dear forumâ??s users,
 
Those one who is using Grasshopper for parametric analysis, please consult:
1.       How within grasshopper GUI adjust parameters of interest inside .idf file
2.       Make .idf runs by any energyplus version
3.       Read output:variables csv in grasshopper
4.       Back to position 1
Now, Honeybee partly provides these possibilities, but it creates idf inside, what provide a lot of limitations. I want to find more flexible way to use Energyplus interconnected with grasshopper.
 
 
 
ARTEM ZHUKOV | REMAK TEAM | HVAC/Mech.Engineer | Energy Engineer and Modeler | Building Physics Specialist | Sustainability Engineer | HVAC TPM | M: +420 774 081 898 | S | IN | T | Web Cal
 




__._,_.___

Posted by: msm hgn <msm.haghani@xxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___