If you only care about zone cross mixing, there are zone:crossmixing and zone:mixing objects available.
Envoyé de mon iPhone
Envoyé de mon iPhone
Le 4 déc. 2015 à 09:04, "qqq000feel@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> a écrit :
Hi
I'm trying to model the interzone airflow with AFN
I used AfrflowNetwork:MultiZone:Component:SimpleOpening with one door object(FenestrationSurface:Detailed), and very simple geometry(only 2 zones in model).
However, when I run the E+ simulation, there is fatal error :
** Severe ** GetAirflowNetworkInput: No External Nodes found in AirflowNetwork:Multizone:ExternalNode. There must be at least 1 external node defined.
I can solve this error by just adding simple crack on roof surface with external AFN nodes definition, but in this way, there is unwanted infiltration AFN node air flow rate occurs.
I just want to model the air flow networks through internal openings(door, window, ...) only.
Any suggestion?
__._,_.___
Posted by: Julien Marrec <julien.marrec@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___