[EnergyPlus_Support] AirFlowNetwork

["Sajal Chowdhury sajal_c@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Recently I am doing Natural Cross Ventilation Simulation.

I input:

Room Air Model Type= cross ventilation

Room Air Setting=Cross Ventilation (Recirculation)

Zone Air flow > Zone Ventilation Design Flow Rate.

but the following errors ...

****Program Version,EnergyPlus-Windows-64 8.1.0.009, YMD=2016.03.02 21:10,IDD_Version 8.1.0.009
   ** Severe  ** Problem with RoomAirSettings:CrossVentilation = Z-1
   **   ~~~   ** AirflowNetwork airflow model must be active in this zone
   **  Fatal  ** GetAirModelData: Errors found getting air model input.  Program terminates.
   ...Summary of Errors that led to program termination:
   ..... Reference severe error count=1
   ..... Last severe error=Problem with RoomAirSettings:CrossVentilation = Z-1

Please help to inform the proper steps.

Sajal Chowdhury
B.Arch.(BUET), M.Arch.(BUET), M.Eng.(HU,Japan)C.

__._,_.___

---

Posted by: Sajal Chowdhury <sajal_c@xxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 4

• Privacy • Unsubscribe • Terms of Use

__,_._,___