[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Sensible Heat ratio in EPlus
I am trying to simulate a internal equipment in a zone with a known sensible heat ratio that would be transferred to the zone air heat gain. I referred I/O reference file an found following are the three heat ratios types based on source type. In my case, Fraction latent and Fraction radiation is "0" as given in the specification sheet. Â My question isÂ what would be the correct value to simulateÂ Sensible heat ratio of 65% in the following heat ratio objects?
Javed Iqbal, LEED AP, CEA
Sr. Energy AnalystÂ
Posted by: Javed Iqbal <eee.javed@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
The group web site is:
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.