Thank you. I have already simulated indoor cooling energy with HVAC Templete: Thermostat with Zone Ideal Load Air System according to input-output. Here, my minimum cooling supply Air Temperature is 26.6OC and demand indoor Air Temperature setpoint is 26.6 oC.(0.1oC than constant set-point). Is this possible? From the result, I always found various humidity level - but I need indoor Humidity 65% in general in all conditions and want to DE-humidify if RH>65% and Humidify if RH<65% and then want to calculate total Cooling Energy. Need Help///Thanks again.
Sajal Chowdhury
B.Arch.(BUET), M.Arch.(BUET), M.Eng.(HU,Japan)C.
B.Arch.(BUET), M.Arch.(BUET), M.Eng.(HU,Japan)C.
On Friday, March 11, 2016 9:24 PM, "Jim Dirkes jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Sajal,
When you install E+, there are many example files, as you know. In the same folder are two HTML files:
- examplefiles.html
- examplefiles-objectslink.html
The second one lists specific objects used within the example files and also references the example files that use these objects. Take a look at this .html file to see where the objects you are interested in appear in an example file.
On Fri, Mar 11, 2016 at 7:03 AM, Sajal Chowdhury sajal_c@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Dear All,Can anybody help me by giving any example file for heating and cooling load and energy calculation for simple Ideal HVAC system (Thermostat)Single zone. In my calculation, cooling load seems to be not ok - but I put all the values according to the input output references.Sajal ChowdhuryB.Arch.(BUET), M.Arch.(BUET), M.Eng.(HU,Japan)C.On Thursday, March 10, 2016 4:26 PM, "Sajal Chowdhury sajal_c@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Dear All,I have already simulated natural ventilation (AFN)control system and my temperature set point 26 degC (max) 18 DegC (min). I want to analysis how much energy demand we need for cooling and heating if indoor temperature becomes more than 26 degC. and less than 18 DegC. So in that case what will be the necessary output variables for Zone Cooling Demand Rate and Zone Heating Demand Rate? Need some suggestions. Thank you.*** There so many output variables so need some fixationSajal Chowdhury
B.Arch.(BUET), M.Arch.(BUET), M.Eng.(HU,Japan)C.
James V Dirkes II, PE, BEMP, LEED AP
CEO/President
The Building Performance Team Inc.
1631 Acacia Dr, GR, Mi 49504
Direct: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Website l LinkedIn
Goodhartâ??s Law: â??Any observed
statistical regularity will tend to collapse once pressure is placed upon it
for control purposesâ??
__._,_.___
Posted by: Sajal Chowdhury <sajal_c@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.