[EnergyPlus_Support] Performance Curves for VRF Heat Pumps in EnergyPlus

["alvand_eng@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Hi all

I used EnergyPlus template in order to simulate a VRF system, but due to the system that I had chosen, I changed some specifications such as rated COP, min and max out door air temperature and..., after the simulation EnergyPlus in .expidf was created some performance curves.

now the question is whether these curves are created based on the input that I entered or they are default curves which don't change?

any help would be appreciated.

Hossein

__._,_.___

---

Posted by: alvand_eng@xxxxxxxxx

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 7

• Privacy • Unsubscribe • Terms of Use

__,_._,___