[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] inquiry
You have no HVAC system. Without one, all the energy
reported will be from the lights and other internal sources that you
specify.
To judge the efficiency of an uncontrolled building, you would compare
your internal zone temperatures to the external temperatures.
At 04:01 AM 5/20/2016, 'balsam a. shalal' balsam.shalal@xxxxxxxxx
[EnergyPlus_Support] wrote:
Hi Julien and Linda....
I've attached the IDF file, the model is a house and my aims are
calculating the amount of heat gain and heat loss that occur by the
effect of solar radiation for all zones individually. Also, I need to
calculate the indoor air temperature, indoor air humidity, and
indoor air velocity and knowing the energy consumption for each zone to
achieve the thermal comfort which is between 22-27C.
I need to use ceiling fans, air cooler and air condition for cooling
(electric power), while in winter, the heater (fuel and electric) will be
used.
I hope you can help me to get all these things in order to use that in
other simulation for other buildings.
regards
Balsam
On Thursday, 19 May 2016,
21:36, "Linda Lawrie linda@xxxxxxxxxxxxxx [EnergyPlus_Support]"
<EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
As Julien said, much better to include your idf file in order for anyone
to help you.
At 07:46 AM 5/19/2016, 'balsam a. shalal' balsam.shalal@xxxxxxxxx
[EnergyPlus_Support] wrote:
Hi Julien..
thanks for your advice, I fixed that and I get this results ( attached
photo), So please could you instruct me about what I have to input to get
outputs for this requirements.
if you want me sending any file, please tell me
I need to calculate (heat gain, heat loss, internal air temperature,
internal Relative Humidity and energy consumption)
thanks in advance
On Thursday, 19
May 2016, 14:31, "Julien Marrec julien.marrec@xxxxxxxxx
[EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
wrote:
Hi,
Your objects are clearly ill-formated. Check around line 218 in your .idf
file (open it with a text editor).
If you cannot figure it out, please send your input file or at least this
portion of the IDF file.
Best,
Julien
PS: Next time please include your error log at a text file.
--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13
LinkedIn (en) :
www.linkedin.com/in/julienmarrec
LinkedIn (fr) :
www.linkedin.com/in/julienmarrec/fr
2016-05-18 20:39 GMT+02:00
balsam.shalal@xxxxxxxxx
[EnergyPlus_Support]
<
EnergyPlus_Support@xxxxxxxxxxxxxxx>:
-
- Hi everyone
- I attached this photo of my simulation results. there is a
fatal error and I don't know how can solve it. I was wondering if anyone
can help me to fix it
- with regards
- balsam
__._,_.___
Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___