[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Dx coil single speed control
Hi all,
I have a single speed dx coil with a setpoint defined. The coil is part of a 100% outdoor air constant volume.
When viewing the simulation results, the coil suceeds achieving the output setpoint in full and part loads.
The question is how does dx single speed cooling coil run at part loads and how does it do that o energyplus? Is the coil partially or fully bypassed from air stream?
__._,_.___
Posted by: alyelhefni@xxxxxxxxx
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___