[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Autosized HVAC bigger than expected
Dear group,
I'm trying to autosize a boiler and chiller for a medium-sized commercial building. Everything is set to autosize with a sizing factor of 1.0 and coincident loads. But the HVAC equipment (e.g., boiler) seems to be given a nominal size that is 20-30% larger than the maximum value in the annual timestep results. I'd have hoped and expected to have the nominal sizes match the peak demand during the sizing days. I'm simulating and reporting the sizing period. I'm also allowing 10 HVAC sizing simulation passes (though this does not change results relative to 1 pass)
Any insights as to what is going on would be greatly appreciated.
Thank you,
Liam
__._,_.___
Posted by: obrien_liam@xxxxxxxxxxx
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___