If you actually want a 125C setpoint, that could be the reason for the error. Water doesn't do well above 100C
🙂
On the other hand, the typical reason for getting a temp out of bounds error (in my experience) is some other problem with my input.
James V Dirkes II, PE, BEMP, BCxP
Team Lead - Building Performance
616 450 8653
Foresight Management
Coffee Conversation:
� drugs are a form of protest against facts. The one who takes them refuses to resign himself to the world of facts.
�� no human being can long remain pleasureless and sad .. those who cannot enjoy spiritual pleasures turn their endeavors for the most part to bodily pleasures.
.. to the extent that people don’t know how to find delight in the world as it is, they often – in their despair � attempt to manufacture enjoyabble feelings by manipulating their own faculties.
From: EnergyPlus_Support@xxxxxxxxxxxxxxx <EnergyPlus_Support@xxxxxxxxxxxxxxx> on behalf of Jean Marais jeannieboef@xxxxxxxxx [EnergyPlus_Support]
<EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Friday, October 23, 2020 4:37 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Subject: [EnergyPlus_Support] No Glycol Loop gets GetSpecificHeatGlycol: Temperature is out of range
Sent: Friday, October 23, 2020 4:37 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Subject: [EnergyPlus_Support] No Glycol Loop gets GetSpecificHeatGlycol: Temperature is out of range
Hi Guys,
Does anybody get this error with loops when there's no glycol in the loop?
** Warning ** GetSpecificHeatGlycol: Temperature is out of range (too high) for fluid [WATER] specific heat **
** ~~~ ** ..Called From:PlantLoopSolver::EvaluateLoopSetPointLoad,Temperature=[125.00], supplied data range=[0.00,125.00]
** ~~~ ** Environment=KEITHSTRASSE (2O-12:26-12), at Simulation time=12/20 00:00 - 00:10
** ~~~ ** ..Called From:PlantLoopSolver::EvaluateLoopSetPointLoad,Temperature=[125.00], supplied data range=[0.00,125.00]
** ~~~ ** Environment=KEITHSTRASSE (2O-12:26-12), at Simulation time=12/20 00:00 - 00:10
Best regards,
Jean
__._,_.___
Posted by: Jim Dirkes <Jim@xxxxxxxxx>
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___