[Equest-users] Appendix G Baseline Model

[Alison Staudinger]

That is what I have done, but my projects have not been submitted yet so
I am not certain how USGBC would rule.  Similarly I used the maximum U
and SC values from 90.1 for the windows and ignored the higher allowable
values of the North windows to make my building easier to model...
realizing with this approach my proposed energy savings will decrease
slightly.  I'd be curious to know if others have done the same with a
successful submittal through the LEED process.

 

Alison Staudinger P.E., LEED AP

JDRM Engineering

5604 N. Main St.

Sylvania, OH  43560

(419) 824-2400

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Niko
Michael Kalinic
Sent: Monday, July 07, 2008 1:14 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Appendix G Baseline Model

 

Hello Everyone,

When creating an Appendix G baseline model in eQUEST for LEED, can you
simply adjust the overall U-value of the exterior wall in the DD mode to
match the assembly maximum U-value from ASHRAE 90.1 Tables 5.5?

Thank You,
Niko

-- 
Niko Michael Kalinic
University of Colorado
Building Systems Program
kalinic at colorado.edu
cell: (303)887-5685
home: (720)379-3993 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080707/24b470af/attachment-0002.htm>