[Equest-users] Extenal Roof and Interior floors
jaulbach at nexant.com
Mon May 19 10:19:40 PDT 2008
Did you remove any definition of roof in the 1st and 2nd floors?
Wizard Screen 3 - under roof definition - no exposed roof (or something
That should fix it.
John R. Aulbach, PE, CEM
701 West Kimberly Ave., Suite 245
Placentia, CA 92870-6342 USA
email: jaulbach at nexant.com
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of
Sent: Monday, May 19, 2008 10:10 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Extenal Roof and Interior floors
Dear e-Quest Users,
I have modelled my 3-storey building in the detailed Wizard. There, I
described 3 building Shell components, each one is located above the
other. When I check the building at the component tree I see that the
internal floors/ceilings are defined as external Roofs. E Quest seems to
add up the layers of the Internal Roofs and the External Roof
construction to define the intermediate construction. Has anybody had
the same problem in the past?
Building Physics Division
London City Office
d: +44(0) 20 7429 3369
t: +44(0) 20 7429 3333
f: +44(0) 20 7429 3300
e: christina.galyfianaki at hurleypalmerflatt.com
w: www.hurleypalmerflatt.com <http://www.hurleypalmerflatt.com>
View company email disclaimer at:
P Please consider the environment before printing this email.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users