[Equest-users] eQuest supply cfm and OA

[Marcus Eliason]

Hello,

I am working on a building comprising three main zones.  One of these zones
has a 100% OA requirement.  I would like for eQuest to auto size the supply
cfm for all zones, thus in the wizard I do not specify any flowrate or OA%.
Once in the detailed mode, under the "Outdoor Air" tab and the "Outside Air
and Economizer" screen, I set the minimum outside air ratio to 1.0.  After
running the simulation and checking the SV-A report, it says that the OA%
for this zone for the simulation was actually 3%, not the 100% this zone
requires.  Can anyone tell me how to force eQuest to 100% OA?  I looked at
the help for the outside air ratio and it stated that it was for winter
heating periods.  Is there a work around for this?  I have attached the .inp
and .pd2 files for this project.

Thank you for your assistance.

Marcus Eliason
Essex Engineering Corporation
404.365.9482
meliason at essexco.com

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Cargo Baseline Test again.inp
Type: application/octet-stream
Size: 61578 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080924/e46b73b1/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Cargo Baseline Test again.pd2
Type: application/octet-stream
Size: 19161 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080924/e46b73b1/attachment-0001.obj>