[Equest-users] Changing Head Setpoint for Condenser Water Pump Head

[Doebber, Ian]

Xavier,  thanks.  You were correct.  

 

One odd item was then when I specify the User default option to 40', then it changes all the Defaults of the Pumps.  Only when I closed EQuest and reopened it did the 40' only apply to CW pumps.  Very Strange.  

 

________________________________

From: Xavier García Casals [mailto:xavier.garcia at aiguasol.coop] 
Sent: Tuesday, September 16, 2008 7:58 AM
To: Doebber, Ian
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Changing Head Setpoint for Condenser Water Pump Head

 

Did you try the right click/restore to default, or the right click/User default options to free this input?

En/na Doebber, Ian ha escrit: 

The default Head Setpoint for the Condenser Water Pump on an Open Cooling Tower is 70 feet which is way too high!  I want to set it to 40 feet but EQuest automatically increases it to 70 ft.  

 

How can I reduce the Head to 40 ft without Equest resizing it?


Regards

Ian

 



________________________________



 
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  

 

-- 



 
Xavier García Casals
 
Sistemas Solares, Eficiencia Energética e Ingeniería Bioclimática 
AIGUASOL INGENIERÍA
 
Sistemes Avançats d'Energia Solar Tèrmica SCCL
C/ Palermo, 17. Bajos dcha. 28043 Madrid
Tel: (+34) 91 142 27 88
 
C/ Roger de Llúria,  29 3r 2a 08009 Barcelona
Tel: (+34) 93 342 47 55  Fax: (+34) 93 342 47 56
 
Mobil: 660 22 94 45
xavier.garcia at aiguasol.coop
http://www.aiguasol.coop <http://www.aiguasol.coop/> 
 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080916/4da318ce/attachment-0002.htm>