[Equest-users] One Line Processor File

[R B]

DOE2.2 might do it. Equest is the interface for it.
-Rohini

On Tue, Sep 23, 2008 at 4:18 PM, Matthew Higgins <higgins at edi-arch.com>wrote:

> Does anyone know if there is a "one line" processor file or program that
> will read an eQuest .BDL file and write a corresponding .SIM file without
> having to open eQuest and wait for the program to load/etc. I know of a
> similar processor for other programs, but I'm not sure about eQuest.
>
> Thank you in advance.
>
> --
> Matthew Higgins, LEED AP
> Technical Specialist
> Environmental Dynamics, Inc.
> Architecture and Sustainability Consulting Services
> 505.242.2851
>
> Any data provided by the Consultant, verbal or written, are to be
> considered opinions of building energy and/or daylight performance. The
> Client understands that the Consultant has no control of occupant habits,
> equipment or material performance or characteristics, site or climate
> conditions or the Contractor's method of assembly, and that the Consultant's
> opinions regarding building energy/daylight performance are made on the
> basis of the Consultant's professional judgment and experience. The
> Consultant makes no warranty, express or implied, that the energy/daylight
> performance of the building will not vary from the Consultant's opinion of
> building energy/daylight performance.
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080924/23519b09/attachment-0002.htm>