[Equest-users] how do you change to Metric units

[John Aulbach]

Yonas:
 
eQuest itself (the front end program) does not yet support the Metric conversion. But I believe DOE-2.2, the engine behind the scenes, does. So you would have to run a batch run.
 
John Aulbach

--- On Mon, 4/6/09, yonas Estefanos <estif_07 at yahoo.co.uk> wrote:


From: yonas Estefanos <estif_07 at yahoo.co.uk>
Subject: [Equest-users] how do you change to Metric units
To: equest-users at lists.onebuilding.org
Date: Monday, April 6, 2009, 2:41 AM






How do you change to Metric units on the equest modelling
 
Thanks
 
Jonas

-----Inline Attachment Follows-----


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090406/caca3016/attachment-0002.htm>