[Equest-users] Centrifugal Chiller vs. Heat Recovery Chiller

[Zareh, Hassan]

Hello All,

When I change the type of the chiller in my model from Centrifugal to
heat recovery (and assign HW loop as recovery loop), the space cool load
gets doubled and space heat load remains the same. Also after this when
I add heat recovery unit to the HVAC systems, again the cool load gets
doubled and heat load remains almost the same (a small drop). Anybody
has any explanation for this?

 

Thanks,

 

Hassan Zareh, M.Eng., P.Eng., LEED AP
Project Engineer
Stantec Consulting Ltd.
100 - 401 Wellington Street West
Toronto ON M5V 1E7
Ph: (416) 598-7642
hzareh at stantec.com 

stantec.com <http://www.stantec.com>  

 

The content of this email is the confidential property of Stantec and
should not be copied, modified, retransmitted, or used for any purpose
except with Stantec's written authorization. If you are not the intended
recipient, please delete all copies and notify us immediately.

 

* Please consider the environment before printing this email.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090831/b2971739/attachment.htm>