[Equest-users] Chillers and Lake/Well systems

Dana Troy DTroy at glumac.com
Thu Aug 20 08:27:43 PDT 2009


Hello everyone,

 

I have a chiller and a Loop-to-Loop-HP connected to two different
Lake/Well loops with Lake/Well heat exchangers. 

 

In doing some QA, I created hourly reports for the thermal load and
fluid flow for each Group Loop Heat Exchanger, however, it only shows a
thermal load and flow if the Loop-to-Loop-HP is in heating mode and it
doesn't show any flow or load for the chillers at all. But in the PS-C
report, it shows that the chillers are all operating, and in the BEPS
report, there is plenty of cooling energy as well as no hours outside of
throttling range. 

 

Does anyone know if this is a bug in eQUEST? 

 

Thanks,

Dana


Dana Troy
Energy Analyst
LEED(r) Accredited Professional

  <http://www.glumac.com/> 

________________________________

320 SW Washington, Suite 200
Portland, OR 97204-2640
T.  503.227.5280  F. 503.274.7674

Thinking. Inside the building.
www.glumac.com <http://www.glumac.com/>  
 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090820/2a5eb272/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 50453 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090820/2a5eb272/attachment-0004.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1425 bytes
Desc: image002.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090820/2a5eb272/attachment-0005.gif>


More information about the Equest-users mailing list