[Equest-users] Split System

[Joel Oester]

Thanks John.

It looks like it gets modeled as a packaged single zone.  Some additional editing is needed on the economizer tab, but other then that it does the trick.


Joel Oester| 


-----Original Message-----
From: John Aulbach [mailto:jra_sac at yahoo.com] 
Sent: Thursday, August 20, 2009 1:19 PM
To: equest-users at lists.onebuilding.org; Joel Oester
Subject: Re: [Equest-users] Split System

Joel:

I have attached a screen shot from the eQuest Wizard, showing a Split System being called out. Set up a simple wizard run with this HVAC input, run it, and see what is in the .INP file.

John Aulbach

--- On Thu, 8/20/09, Joel Oester <joester at dcengineering.net> wrote:

> From: Joel Oester <joester at dcengineering.net>
> Subject: [Equest-users] Split System
> To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
> Date: Thursday, August 20, 2009, 9:01 AM
> 
> 
> 
>  
>  
> 
> 
> 
> 
> 
> 
>  
> 
> 
> 
> I'm
> wondering how to model a basic 3 ton split system
> that is being installed in commercial building.  I
> tried the residential
> system, but there is no night cycle fan control.  This
> may be a basic
> question, but I want to make sure I'm getting it
> right.  Thanks. 
> 
> 
>   
> 
> Joel
> Oester 
> 
> 
> 
>  
> 
>    
> 
> 
> 
>  
> 
> 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank
> message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>