[Equest-users] eQuest parametrics question

[John Aulbach]

Bryce:
 
I am not certain, but if I had to take stab at it, you have already knocked your schedule off the tracks by going to COOL-CONTROL = WARMEST versus SCHEDULED.
 
Others please comment.
 
John Aulbach

--- On Mon, 8/31/09, Bryce Munger <brycem at abacusrm.com> wrote:


From: Bryce Munger <brycem at abacusrm.com>
Subject: [Equest-users] eQuest parametrics question
To: equest-users at lists.onebuilding.org
Date: Monday, August 31, 2009, 4:29 PM








I am running a sim using parametrics and in my base model I have “Cold Deck Schedule” and “Availability Schedule” defined and “Cool Control” set to Scheduled.  As a parametric, I want to change the control method to warmest and reset the cold deck schedule to default.  I know how to change the methodology to “Warmest” but how do I change the cold deck schedule to remove the schedule I have defined in my base model?  Manually, I would right click and “Restore Default”.  In the parametrics definition box there is no selection for “Undefined”.
 
Thanks for the help.
 
 
Bryce Munger Energy Analyst
Abacus Resource Management Inc.
14845 SW Murray Scholls Drive, Suite 110-308, Beaverton, OR 97007
P: 541.505.8420 ● C: 541.729.6532 ● F: 971.249.0777 ●  E: brycem at abacusrm.com
 
 
-----Inline Attachment Follows-----


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090831/c3754e7c/attachment-0002.htm>