[Equest-users] Converting Interior Walls to Exterior Walls

[Katie Tuttle]

Use the .inp file to modify those - that's the best way I know how.  The
file is located with your project - open it with notepad.  (See below).
You'll have to go find each wall and change them to = EXTERIOR-WALL and
then add the same fields (construction/height/location/shading-surface).
MAKE SURE YOU LEAVE THE TWO PERIODS AT THE END OF EACH WALL, OTHERWISE
YOU'LL MESS UP YOUR FILE.  I WOULD DO A SAVEAS ON THIS FILE BEFORE YOU
MODIFY IT IN CASE YOU MESS SOMETHING UP!!!  Save that .inp file and then
open your .PD2 file again.  Then you can update the construction types.
Hope this helps!

 

 

KATIE L. M. TUTTLE EI, LEED(r) AP
Mechanical Designer

 

Henderson Engineers, Inc.   8325 Lenexa Drive  Lenexa, KS 66214
dir 913 742 5508  tel 913 742 5000  fax 913 742 5001   www.hei-eng.com
<http://www.hei-eng.com> 

 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Kevin
Kelly
Sent: Tuesday, December 29, 2009 1:19 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Converting Interior Walls to Exterior Walls

 

Good Afternoon,

 

I have two (2) of the approximately 50 exterior walls that somehow along
the way were modeled as interior walls.  The model is very close to
completion and has a many edits in detailed interface.  Is there any way
to convert these walls into exterior walls? 

 

I have never added any spaces or changed any zone layouts outside of the
wizards.  I am assuming that is what I will end up doing, but I was just
checking to see if there was a quick fix that I couldn't find.

 

Anyone have any clue how this could have happened?

 

I included a screen shot of my 3D model with the specific walls
highlighted.

 

Thank you everyone, and have a happy new year!

 

Kevin Kelly. LEED AP

R3 Energy

Energy Systems Analyst

914.909.3940 x115

kkelly at r3energy.com


This email and any files transmitted with it are confidential and
are intended solely for the use of the individual or entity to whom
they are addressed.  This communication represents the originator's
personal views and opinions, which do not necessarily reflect those of
Henderson Engineers, Inc.  If you are not the original recipient or the
person responsible for delivering the email to the intended recipient,
be advised that you have received this email in error, and that any use,
dissemination, forwarding, printing, or copying of this email is strictly
prohibited.  If you received this email in error, please immediately
notify administrator at hei-eng.com.





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091229/af89716c/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 92941 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091229/af89716c/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 5566 bytes
Desc: image002.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091229/af89716c/attachment-0001.gif>